STAND ALONE COMPLEX

這是一個雜記的版面，針對我發生的狀況跟解決方式都盡可能記錄下來

1. 2023/1/13，錯誤訊息為"Moonraker can't connect to Klipper! Please check if the Klipper service is running."

用Mainsail網頁介面做完系統更新之後，Moonraker無法跟Klipper建立連接，也就是說無法操作印表機了

解：還原Moonraker與klipper，用putty進入pi後台，使用以下指令(Ref.)

The following commands may be used to restore Moonraker:

cd ~
rm -rf moonraker
git clone https://github.com/Arksine/moonraker.git
cd moonraker/scripts
./install-moonraker.sh
./set-policykit-rules.sh
sudo systemctl restart moonraker

And for Klipper:

cd ~
rm -rf klipper
git clone https://github.com/Klipper3d/klipper.git
sudo systemctl restart klipper

2. 待續